Newton Meters - 250g, 2.5N Blue

Newton Meters - 500g, 5N Green

Newton Meters - 1kg, 10N Brown

Newton Meters - 2kg, 20N Red

Newton Meters - 3kg, 30N White

Newton Meters - 5kg, 50N Yellow

This can be used to show the forces exerted by atmospheric pressure. A light walled tinplate can, H260 x 75mm diameter, with an air-tight neck and screw cap. A small quantity of water in the can is boiled vigorously until steam occupies the space inside the can, at which point the top is screwed...

Palm-sized, hollow metallic ball with a manometer connected to it for demonstrating change of pressure in a closed volume of air when heated or cooled. Immersing the ball in a water bath at a specific temperature allows the relationship between pressure and temperature of the enclosed air to be ...

These spring balances are designed to measure weight and horizontal or vertical forces. Each spring balance is calibrated in grams on 1 side and newtons on the other in clear, easy to read markings. Set contains 250 g (2.5 newton), 500 g (5 newton), 1 kg (10 newton) 2 kg (20 newton), 3 kg (30 ne...

Our popular UNILAB Light Gate is fully protected against incorrect connection of signal or power and supplies from 9 to 25V a.c or d.c. can be used.

A signal LED indicates that the unit is functioning correctly when obstructed. The unit is compatible with all of our timing devices such as&...

Your friends will be amazed when you simply balance this pocket-money Pteranodon on the tip of your finger. It looks so impossible they will think it is a magic trick! The Amazing Balancing Pteranodon appears to defy gravity but is actually very easy to balance on your finger, nose, pen, bookshe...

The Unilab g by freefall ball is a fun way to measure the acceleration due to gravity and make empirical measurements to illustrate the laws of motion. The g ball contains an accurate timer with millisecond resolution. Timing begins when the button is released and stops when the g ball hits the g...

The SpillNot is an ingenious gadget that will let you carry an open beverage without spilling it. With a little bit of practice, spin a cup of liquid around in a circle without even losing a drop! The forces in action will fascinate your students and challenge their analytical reasoning.

<...

Five different surfaces. How do surfaces affect friction and the distance trucks travel?

Neat and compact ramps for floor or tabletop use. The solid wood ramps adjust to different heights and take apart for easy storage. The set includes 5 ramps and 5 open-backed trucks, which can be loaded for other investigations. Dimensions of ramp: 115mm x 500m.

50mm diameter aluminium pulley on an aluminium frame measuring 20 x 20 x 110mm. Frame includes three holes and a clamping screw to accommodate mounting to standard retort stand rods.

Pulleys may be fitted to the frame with its axis of rotation in any one of three planes.

50mm diameter ball bearing plastic pulley. Mounted on an aluminium frame, for clamping to the edge of a bench or force board. The clamp is detachable from the bar carrying the pulley.

Overall length of frame (pulley bar): 110mm.

Maximum clamp opening: 25mm.

A wooden planed board 600 x 75mm. The board is hinged at one end to a wooden base board and the angle of incline can be fixed in a number of positions by use of a moveable block. Also included is a reversible friction slider (100 x 65mm), one side of which is cut so it has only half the area in ...

Wooden friction board 490 x 75 x 20mm, a wooden slider with hook 140 x 70 x 20mm, a plain aluminium slider and an aluminium slider with rubber backing.

A further long aluminium slider is provided which fits over the friction board to provide an alternative surface type.

Supplied as a kit for eight pupils and consists of five plywood beams 600 x 44 x 3mm graduated every 38mm and with a groove across its centre to locate the fulcrum point.

Also included are four fulcrums 32 x 32 x 64mm and forty metal blanks 25mm square.

The masses of the blanks are ...

Double Pulley Blocks

Incorporating 50mm diameter plastic pulleys carried in tough plastic frames. These blocks are available in double and triple sheave form with plain bearing pulleys. The bearing pin may be rapidly removed from the frame, thus releasing the pulley(s) and allowing easy &#...

Triple Pulley Blocks

Incorporating 50mm diameter plastic pulleys carried in tough plastic frames. These blocks are available in double and triple sheave form with plain bearing pulleys. The bearing pin may be rapidly removed from the frame, thus releasing the pulley(s) and allowing easy &#...

50mm diameter aluminium pulley carried on a plastic frame.

Features:

• Clamp fitting for anchoring to a bench/force board (max. width 30mm)

• Slot with clamping screw to allow attachment to a standard retort stand rod

Aluminium, 50 mm diameter, mounted in metal frame, accurately centered. Single.

Updated kit for Motion Measurement uses the Unilab Millisecond Timer as the timing device.

The kit contains:

•

This unique plastic moulding turns a fizzy drink bottle into a squeezy or ‘stomp rocket’ launcher – enabling students, for example, to design and make educational kits intended for retail sale. Ideal for use in graphics and packaging projects.

What do you get?

The Super Precision Gyroscope has been designed and built to the highest precision from the very start, made from solid brass with a light-weight aluminium frame. Carefully chosen stainless-steel miniature ball bearings allow it to run smoothly and almost silently for an amazingly long time. The...